LED Indoor Lighting

The office lighting design should be combined with the natural lighting effect of the specific office to make a specific plan. Here we introduce the usual office lighting design. The specific lighting plan can be obtained by contacting C-STAR for free!

The intensity and color of natural light and artificial light sources in the office directly affect the staff's visual organs, which in turn affects the staff's work emotions and work effects. Therefore, the lighting design in the office cannot be ignored.

In the case of artificial lighting, there are four commonly used lighting methods: general lighting, local lighting, comprehensive lighting, and special lighting.
General lighting is also called comprehensive lighting. It is a lighting method that takes care of the entire illuminated surface regardless of special local needs. General meeting rooms, reception rooms and offices without special lighting requirements can be used in this way.

Local lighting refers to the lighting method used to increase the brightness of a specified location. It is usually necessary to use local lighting in offices that require fine operations such as writing and calculation.

Comprehensive lighting refers to the lighting method used when the illumination on the working surface needs to be composed of general lighting and local lighting. It is often used in the situation where the office requirements of different illumination levels or the same illumination levels are not concentrated.

Special lighting such as color lighting, invisible light lighting, etc. Usually only used in offices with special and specialized lighting requirements.
In order to effectively control the lighting environment of the office, enterprises should pay attention to the following points:

1. Correctly select the lighting method according to the nature of the work and the distribution of the work place, so that it not only helps to improve the lighting effect, but also helps to reduce the lighting investment and daily expenses.

2. The correct choice of light source In office lighting, try to use natural light as the light source. This is not only conducive to energy saving and cost, but more importantly, natural light is bright and soft, and it has a good impact on the physiological function of the human body. Artificial light sources should only be used as supplementary lighting sources in office lighting, combined with natural light sources.

3. Prevent glare When the brightness is too high or the brightness ratio is too large in the visual field, the light that makes people feel dazzling is glare. The measures to prevent glare are mainly to limit the brightness of the light source; reasonably distribute the light source, such as making the light source above the 45-degree line of sight, forming a protective angle or blocking the light source with an opaque material, appropriately increasing the ambient brightness, and reducing the brightness ratio.

4. Make the illuminance uniform by rationally arranging the lamps and lanterns to make the illuminance close to uniform and relatively uniform. This usually requires the difference between the maximum and minimum illuminances in the office and the average illuminance to be less than 1/3 of the average illuminance .

For specific use of lamps, you can choose C-STAR's 600 * 600 grid lamp panel, which is made of high-strength cold-rolled plate, is not easy to deform, and adopts high protection settings to ensure safety and reliability; in addition, you can also choose LED panel lights, using optical The plastic light guide plate has high light transmittance and uniform light distribution. A constant current power supply is used to ensure that the lamp is not burned when the voltage is unstable.